01320 / PEM Permanent Holding Magnet

Kendrion 01320 / PEM series permanent holding magnets have a compact round-shaped body made from hardened precision steel.

The coil is fully potted with resin to prevent dust, oil, grease, liquids, vapour and mud ingress.

Permanent holding magnets consist of a permanent magnet to hold ferromagnetic workpieces. When energised, the permanent magnet neutralises, and the workpiece disengages.

As a result, these holding magnets are ideal where long holding periods are required and energised for short times only.

In transportation devices, permanent holding magnets are used as safety magnets as loads are held reliably, even in a power failure situation.

There are twelve body sizes; the largest achieves up to 3,500N of holding force.

Holding forces depend on the associated parts, such as mating material, minimum material thickness and diameter, and zero air gap with a smooth surface.

The standard voltage/duty cycle is 24V DC / 15%, 25%, and 100%ED with flying lead connections.

01320 versions are rear centrally female threaded. PEM versions have a back central male threaded shaft for mounting the device.

Anchor plates are available to achieve the optimum holding force for the corresponding sized holding magnet.

Part Numbers Show…

01 32002B00 | 01 32003B00 | 01 32005B00 | 01 32007B00 | 01 32009B00 | 01 32010B00 | 01 32015B00 | 0132002B00 | 0132003B00 | 0132005B00 | 0132007B00 | 0132009B00 | 0132010B00 | 0132015B00 | PEM1213A | PEM1515A | PEM2020A | PEM2525A