Tico 732 Multi-function Counter

The Hengstler Tico 732 multi-function counter offers a broad range of functionality all combined into one economical counter design, programmable as a totalising counter, a preset counter or batch counter, ratemeter, timer or shift counter.

The 6 digit display is available as either an LCD (9mm digit height) or an LED single line display (7.6mm digit height). The supply voltage is 12 to 24V DC or 24, 115 and 230V AC.

Choose up to two SPDT relays (1A @ 250V AC / 30V DC). Relay outputs can be programmed independently of each other, as a timed event upon reaching a preset value (20ms to 1s) or latched until reset.

Auxiliary power (12-30V DC @ 50mA max.) when operating from an AC supply is available should you require direct wiring of an encoder or sensor.

The reset can be automatic, manual or remote; additionally, the front reset button can be disabled upon set-up to prevent accidental operation.

Protection class ratings are IP65 (front side); the terminals are IP20. Connections are made using screw terminals located to the rear of the counter. A spring clip that tightens against the panel secures the device to the panel cutout.

Downloads

Tico 732 series datasheet TTCC023 1.3MB
Tico 732 instruction manual Doc-Nr. 2 732 017 4.0MB